ZP25旋转式压片机(ZP25)

ZP25旋转式压片机

本机用以将各种颗粒状原料压制成片状，除圆片以久还可以压制各种几何形状的异形片、双面刻字片。其结构为双压式，有两套加料装置和两套压轮。转盘上可装25付活络式冲杆，旋转一周即可压制50片。压制圆片时，根据片径大小、冲杆上可装双冲、三冲和四冲。故适用于大批生产。压片时转盘的速度、物料的充填深度、压片厚度、下冲顶出高度均可调节。随机附单独吸粉箱，通过吸粉管与吸嘴可吸取机器运转时所产生的粉尘，避免粉尘粘结堵塞，并可回收原料重新使用。

This machine is applied to press all kinds of particle material into tablets and can press special-shaped tablets in all geometric shapes,double tablets and tablets with figures at both sides besides round tablets.It is constructed as double pressing type and has two sets of charging device and two pressing wheel.The turret carrices 25 sets of movable-punches and dies So 50 tablets will be pressed for each revolution of turret.When pressing round tablets,two punches,three punches,or four punches can be installed on one punch mold according to the tablets'diameters.so it is suitable for batch production.During operation,the turret speed,depth of filling material,tablets thickness and plunging lift-out height can be adjusted.Pressure to pressing tablets is set by hydraulic system,to which pressure gauge indication is attached.Separate powder-absorbing box is supplied with the machine,It may absorb the powder from the operation of the machine via powder sucker and suction port to avoid bonding and clogging of powder and to recover raw material for reuse.

主要技术参数 MAIN TECHNICAL SPECIFICATIONS

冲模数 DIES 25sets付

***大压片压力 MAX.PRESSURE 60KN千牛

***大压片直径 MAX.DIA OF TABLET 20mm毫米

***大充填深度 MAX.EDPHTH OF FILL 15mm毫米

***大片剂厚度 MAX.THICKNESS OF TABLET 9mm毫米

转台速度 TURRET SPEED 6-10r/min转/分

***大生产能力 PRODUCTION CAPACITY 单冲：18000-30000pc/h片/时

电机 MOTOR 3KW、950r/min、380V/50HZ千瓦、转/分、伏50赫

外形尺寸 OVERALL SIZE 1100×1100×1700mm毫米

主机重量 NET WELGHT 1800kg千克